| Â Model Name |
 Z790 GAMING X AX |
| Â CPU |
|
| LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors |
| L3 cache varies with CPU |
| (Please refer “CPU Support List” for more information.) |
| Â Chipset |
 Intel® Z790 Express Chipset |
| Â Memory |
|
| Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules |
| 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory |
| Dual channel memory architecture |
| Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| Support for Extreme Memory Profile (XMP) memory modules |
| (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” for more information.) |
| Â Onboard Graphics |
|
| Integrated Graphics Processor-Intel® HD Graphics support: |
| 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz |
| * Support for HDMI 2.0 version and HDCP 2.3. |
| 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 |
| * Support for DisplayPort 1.2 version and HDCP 2.3 |
| (Graphics specifications may vary depending on CPU support.) |
| Â Audio |
|
| Realtek® Audio CODEC |
| High Definition Audio |
| 2/4/5.1/7.1-channel |
| * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. |
| Support for S/PDIF Out |
| Â LAN |
|
| Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
| Â Expansion Slots |
|
| CPU: |
| 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| Chipset: |
| 1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1) |
| 1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2) |
| Â Storage Interface |
|
| CPU: |
| 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
| Chipset: |
| 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB) |
| 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) |
| 6 x SATA 6Gb/s connectors |
| * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors. |
| RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices |
| RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices |
| Â USB |
|
| Chipset: |
| 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support |
| 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header |
| 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
| 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header) |
| Chipset+2 USB 2.0 Hubs: |
| 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
| Â Internal I/O Connectors |
|
| 1 x 24-pin ATX main power connector |
| 2 x 8-pin ATX 12V power connectors |
| 1 x CPU fan header |
| 1 x water cooling CPU fan header |
| 3 x system fan headers |
| 1 x system fan/water cooling pump header |
| 2 x addressable LED strip headers |
| 2 x RGB LED strip headers |
| 4 x M.2 Socket 3 connectors |
| 6 x SATA 6Gb/s connectors |
| 1 x front panel header |
| 1 x front panel audio header |
| 1 x USB Type-C® header, with USB 3.2 Gen 2 support |
| 1 x USB 3.2 Gen 1 header |
| 2 x USB 2.0/1.1 headers |
| 2 x Thunderboltâ„¢ add-in card connectors |
| 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
| 1 x Q-Flash Plus button |
| 1 x reset button |
| 1 x reset jumper |
| 1 x Clear CMOS jumper |
| Â Back Panel Connectors |
|
| 4 x USB 2.0/1.1 ports |
| 2 x SMA antenna connectors (2T2R) |
| 2 x USB 3.2 Gen 2 Type-A ports (red) |
| 1 x DisplayPort |
| 1 x HDMI 2.0 port |
| 3 x USB 3.2 Gen 1 ports |
| 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support |
| 1 x RJ-45 port |
| 1 x optical S/PDIF Out connector |
| 2 x audio jacks |
| Â I/O Controller |
|
| iTE® I/O Controller Chip |
| Â H/W Monitoring |
 Voltage detection |
| Temperature detection |
| Fan speed detection |
| Water cooling flow rate detection |
| Fan fail warning |
| Fan speed control |
| Â BIOS |
|
| 1 x 256 Mbit flash |
| Use of licensed AMI UEFI BIOS |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Â Unique Features |
|
| Support for GIGABYTE Control Center (GCC) |
| * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
| Support for Q-Flash |
| Support for Q-Flash Plus |
| Support for Smart Backup |
| Â Bundled Software |
|
| Norton® Internet Security (OEM version) |
| LAN bandwidth management software |
| Â Operating System |
|
| Support for Windows 11 64-bit |
| Support for Windows 10 64-bit |
| Â Form Factor |
|
| ATX Form Factor; 30.5cm x 24.4cm |
| Â Warranty |
 3 Years |
Gaming Motherboard, Gigabyte, Gigabyte Z790, Intel Platform, Intel Z790, Motherboards
There are no reviews yet.